Product finder
You are searching for spring steel but do not know yet what you need exactly?
Our product finder will help you to find out the best product. Simply answer the following questions:
Choose the desired cross section:
When it comes to round spring steel wire You can choose between carbon steel or stainless steel:
spring steel wire (patented drawn)
Material Code | SH (used to be: "Sorte C") |
Tensile strength | Depending on the diameter, find a table here |
Diameter | 0,2-18 mm |
Product | coils, spools, straightened bars |
spring steel wire (stainless)
Material Code | 1.4310 (X10CrNi18-8) |
Material 1.4404, 1.4401, 1.4571 is available on demand | |
Tensile strength | Depending on the diameter, find a table here |
Diameter | 0,2-16 mm |
Product | Coils, spools, straightened bars |
Those products are flat spring steel with a thickness of less than 3 or 4 mm:
carbon spring steel strip (annealed)
Material | C75S/C85S+LC |
Standard tensile strengths | 490-640 N/mm² |
Dimensions | From 0,05 mm thickness to max. 4 x 200 mm |
If you need wider Dimensions maybe 75Cr1 is an alternative | |
Product | Strips and sheets Optional: round Edges |
carbon spring steel strip (hardened & tempered)
Material | C75S/C85S+QT |
Standard tensile strengths | 1320-1520 N/mm² 1570-1770 N/mm² not that common but possible: 1100-1300 N/mm² and further ranges |
Dimensions | From 0,02 mm thickness to max. 3 x 230 mm and 4 x 30 mm |
If you need wider Dimensions maybe 75Cr1 is an alternative | |
Product | Strips and sheets Optional: round Edges |
spring steel strip (stainless)
Material | 1.4310 (X10CrNi18-8) |
Standard tensile strengths |
1100-1300 N/mm² 1300-1500 N/mm² 1500-1700 N/mm² |
Dimensions | From 0,05 mm thickness to max. 3 x 300 mm |
Product |
Strips and sheets Optional: round Edges |
Those products are flat spring steel with a thickness of more than 3 mm:
Spring bar steel (hot rolled)
Material Code | 56Si7 (previous: 55Si7) |
Properties | hot rolled (covered in scale) |
standard tensile strengths | 900-1100 N/mm² |
Dimensions | 4 x 20 mm to 20 x 150 mm |
Form | flat bars of a length of 5-6 m |
tool steel (low alloyed) - 75Cr1
Material | 75Cr1 |
Properties | Similar to C75S +QT und +LC |
Hardening grades: | |
1. Hot rolled, annealed (+AC)
|
2. Cold rolled, bright hardened and tempered (75Cr1+QT)
|
Product | Blanks/Sheets |
Contact
Tel.: +49 (0)6104 405960
Fax: +49 (0)6104 405970
info[at]stahlbecker[dot]com