Bei Stahl-Becker erhalten Sie den Werkstoff 1.4404 als Band im Ring und bereits gerichtet als Tafeln.
At Stahl-Becker you will get stainless steel strips as coils or as straightened sheets.
Material | Material Number | US Material Code (AISI/SAE) | Density (g/cm³) |
---|---|---|---|
X2CrNiMo17-12-2 | 1.4404 | ~ 316L | 8,0 |
Material Standard |
DIN EN 10088-2 DIN EN 10151 |
Dimension standard |
DIN EN ISO 9445 |
Products |
Band as straightened sheets Strips |
Dimensions | Width: standard width is 300 mm At Rm 1100-1400 N/mm²: |
Edges | Cut edges, rounded on demand |
Tensile strength (Rm) | 500-800 N/mm² and 1100-1400 N/mm² |
Surface |
|
Information |
|
Chemical analysis (in %) according to DIN EN 10088-2, table 3
Material Code | 1.4404 |
C | ≤ 0,03 |
Si | ≤ 1,00 |
Mn | ≤ 2,00 |
P | ≤ 0,045 |
S | ≤ 0,015 |
Cr | 16,50 - 18,50 |
Mo | 2,00 - 2,50 |
Ni | 10,00 - 13,00 |
N | ≤ 0,11 |
Stahl-Becker offers you high class wire steelgrade 1.4404/AISI 316L as coils or straightened rods.
Material | Material Number | US Material Code (AISI/SAE) | Density (g/cm³) |
---|---|---|---|
X2CrNiMo17-12-2 | 1.4404 | ~ 316L | 8 |
Material Standard |
DIN EN 10088-3 |
Dimension standard |
DIN EN 10218-2 DIN EN 10278 |
Products |
Wire (coils) Wire (spools) Straightened rods |
Dimensions | Diameter 0,15 - 16 mm |
Tensile strength (Rm) |
|
Surface | matt shining, polished, ground and polished |
Information |
|
Chemical analysis (in %) according to DIN EN 10088-3, table 3
Material Code | 1.4404 |
C | ≤ 0,030 |
Si | ≤ 1,00 |
Mn | ≤ 2,00 |
P | ≤ 0,045 |
S | ≤ 0,030 |
Cr | 16,50 - 18,50 |
Mo | 2,00 - 2,50 |
Ni | 10,00 - 13,00 |
N | ≤ 0,11 |
Remark | For processed products, a controlled sulfur content of 0.015 to 0.030 % is recommended. |