As stainless steel strip we predominantly stock material-no. 1.4301. You can order this material as strips or sheets.
Our special strength is a distinctive stock of wide strips (mostly with a width of 300 mm) in a variety of thicknesses.

Material Material Number US Material Code (AISI/SAE)
X5CrNi18-10 1.4301 304
Material Standard

DIN EN 10088-2
Dimension standard

DIN EN ISO 9445
Products

Band as straightened sheets

Strips

Dimensions

Width: 2,0 to 300,0 mm
Thickness: 0,15 to 3,00 mm

Other dimensions on request
Edges cut or rounded
Tensile strength (Rm)

500 to 1000 N/mm²
Surface

2R / 2B
Information
  • Stainless steel according to EN 10088 has a chrome proportion not less than 10,5% and a carbon proportion of less than 1,2%.
  • Stainless steels are resistant against rust and acids.

Chemical analysis (in%) according to EN 10088-2

Material Code 1.4301
C ≤ 0,07
Si ≤ 1,00
Mn ≤ 2,00
P ≤ 0,045
S ≤ 0,015
Cr 17,00 - 19,50
Ni 8,00 - 10,50
N ≤ 0,11
Remark For processed products, a controlled sulfur content of 0.015 to 0.030% is recommended and is permitted.

Additional Informtion

TOLERANCES

Tolerances of thickness according ISO 9445, table 1, for nominal widths below 125 mm
Tolerances of thickness according to ISO 9445, table 1, with nominal widths of 125 to less than 250 mm
Tolerances of thickness according to ISO 9445, table 1, with nominal widths of 250 to less than 600 mm
Width tolerances according ISO 9445, table 4, for nominal widths below 40 mm
Width tolerances according ISO 9445, table 4, with nominal widths of 40 to less than 125 mm
Width tolerances according ISO 9445, table 4, with nominal widths of 125 to less than 250 mm
Width tolerances according ISO 9445, table 4, with nominal widths of 250 to less than 600 mm
Length tolerances according ISO 9445, table 7
Show Data Sheet
erstelle PDF...